View CM1620-06DE_6297644.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lcd and camera emi filter array with esd protection cm1620 ?2010 scillc. all rights reserved. publication order number: may 2010 ? rev. 2 cm1620/d features ? six or eight channels of emi filtering with integrated esd protection ? pi-style emi filters in a capacitor-resistor- capacitor (c-r-c) network ? 15kv esd protection on each channel (iec 61000-4-2 level 4, contact discharge) ? 30kv esd protection on each channel (hbm) ? greater than -25db attenuation (typical) at 1ghz ? nudfn package with 0.40mm lead pitch: ? 12-lead: 2.5mm x 1.20mm x 0.50mm ? 16-lead: 3.5mm x 1.20mm x 0.50mm ? lead-free finishing applications ? applications ? lcd and camera data lines in mobile handsets ? i/o port protection for mobile handsets, notebook computers, pdas, etc. ? emi filtering for data ports in cell phones, pdas or notebook computers ? wireless handsets ? handheld pcs/pdas
cm1620 rev.2 | page 2 of 15 | www.onsemi.com 16-pin descriptions device pin(s) device pin(s) -06 -08 name description -06 -08 name description 1 1 filter1 filter + esd channel 1 12 16 filter1 filter + esd channel 1 2 2 filter2 filter + esd channel 2 11 15 filter2 filter + esd channel 2 3 3 filter3 filter + esd channel 3 10 14 filter3 filter + esd channel 3 4 4 filter4 filter + esd channel 4 9 13 filter4 filter + esd channel 4 5 5 filter5 filter + esd channel 5 8 12 filter5 filter + esd channel 5 6 6 filter6 filter + esd channel 6 7 11 filter6 filter + esd channel 6 ? 7 filter7 filter + esd channel 7 ? 10 filter7 filter + esd channel 7 ? 8 filter8 filter + esd channel 8 ? 9 filter8 filter + esd channel 8 ? gnd pad gnd device ground
cm1620 rev. 2 | page 3 of 15 | www.onsemi.com ordering information part numbering information lead-free finish pins package ordering part number 1 part marking 12 nudfn-12 cm1620 -06de p20 16 nudfn-16 cm1620 -08de p208 b note 1: parts are shipped in tape & reel form unless otherwise specified. specifications absolute maximum ratings parameter rating units storage temperature range ?65 to +150 c dc power per resistor 100 mw dc package power rating 500 mw standard operating conditions parameter rating units operating temperature range ?40 to +85 c
cm1620 rev.2 | page 4 of 15 | www.onsemi.com electrical operat ing characteristics (note1) symbol parameter conditions min typ max units r resistance 80 100 120 c total total channel capacitance at 2.5vdc reverse bias, 1mhz, 30mvac 14 17 22 pf c capacitance c at 2.5vdc reverse bias, 1mhz, 30mvac 8.5 pf v diode standoff voltage i diode = 10 a 6.0 v i leak diode leakage current (reverse bias) v diode = + 3.3v 0.1 1.0 a v sig signal clamp voltage i load = 10ma 5.6 6.8 9.0 v v esd in-system esd withstand voltage a) human body model, mil-std-883, method 3015 b) contact discharge per iec 61000-4- 2 level 4 see note 2 30 15 kv kv r dyn dynamic resistance positive negative 2.3 0.9 f c cut-off frequency z source = 50 , z load = 50 channel r = 100 , channel c = 17pf 200 mhz a 1ghz absolute attenuation @ 1ghz from 0db level z source = 50 , z load = 50 , dc bias = 0v; see notes 1 and 3 -30 db a 800mhz - 6ghz absolute attenuation @ 800mhz to 6ghz from 0db level z source = 50 , z load = 50 , dc bias = 0v; see notes 1 and 3 -25 db note 1: t a =25 c unless otherwise specified. note 2: esd applied to input and output pins with respect to gnd, one at a time. note 3: attenuation / rf curves characteri zed by a network analyz er using microprobes.
cm1620 rev. 2 | page 5 of 15 | www.onsemi.com performance information typical filter performance (t a =25c, dc bias=0v, 50 ohm environment) figure 1. insertion loss vs. frequency (f ilter1 input to gn d, CM1620-06DE) figure 2. insertion loss vs. frequency (f ilter2 input to gnd, CM1620-06DE)
cm1620 rev.2 | page 6 of 15 | www.onsemi.com performance information (cont?d) figure 3. insertion loss vs. frequency (f ilter3 input to gnd, CM1620-06DE) figure 4. insertion loss vs. frequency (f ilter4 input to gnd, CM1620-06DE)
cm1620 rev. 2 | page 7 of 15 | www.onsemi.com performance information (cont?d) figure 5. insertion loss vs. frequency (f ilter5 input to gn d, CM1620-06DE) figure 6. insertion loss vs. frequency (f ilter6 input to gnd, CM1620-06DE)
cm1620 rev.2 | page 8 of 15 | www.onsemi.com performance information (cont?d) figure 7. insertion loss vs. frequency (f ilter1 input to gnd, cm1620-08de) figure 8. insertion loss vs. frequency (f ilter2 input to gnd, cm1620-08de)
cm1620 rev. 2 | page 9 of 15 | www.onsemi.com performance information (cont?d) figure 9. insertion loss vs. frequency (f ilter3 input to gnd, cm1620-08de) figure 10. insertion loss vs. frequency (f ilter4 input to gnd, cm1620-08de)
cm1620 rev.2 | page 10 of 15 | www.onsemi.com performance information (cont?d) figure 11. insertion loss vs. frequency (f ilter5 input to gn d, cm1620-08de) figure 12. insertion loss vs. frequency (f ilter6 input to gnd, cm1620-08de)
cm1620 rev. 2 | page 11 of 15 | www.onsemi.com performance information (cont?d) figure 13. insertion loss vs. frequency (f ilter7 input to gnd, cm1620-08de) figure 14. insertion loss vs. frequency (f ilter8 input to gnd, cm1620-08de)
cm1620 rev.2 | page 12 of 15 | www.onsemi.com performance information (cont?d) typical diode capacita nce vs. input voltage figure 15. filter capacitance vs. input voltage (normalized to capacitance at 2.5vdc and 25c)
cm1620 rev. 2 | page 13 of 15 | www.onsemi.com mechanical details nudfn-12 mechanical specifications dimensions for the 12-lead, 0.4mm pitch nudfn package are presented below. package dimensions package nudfn jedec no. mo-229c * leads 12 millimeters inches dim. min nom max min nom max a 0.45 0.50 0.55 0.018 0.020 0.022 a1 0.00 0.02 0.05 0.000 0.001 0.002 a3 0.127 ref 0.005 ref b 0.15 0.20 0.25 0.006 0.008 0.010 d 2.40 2.50 2.60 0.094 0.098 0.102 d2 1.70 1.80 1.90 0.067 0.071 0.075 e 1.10 1.20 1.30 0.043 0.047 0.051 e2 0.20 0.30 0.40 0.008 0.012 0.016 e 0.40 bsc 0.016 bsc k 0.20 0.008 l 0.20 0.25 0.30 0.008 0.010 0.012 # per tape and reel 3000 pieces controlling dimension: millimeters * this package is compliant with jedec standard mo-229c with the exception of the d, d2, e, e2, k and l dimensions as called out in the table above. dimensions for 12-lead, 0.4mm pitch nudfn package
cm1620 rev.2 | page 14 of 15 | www.onsemi.com mechanical details nudfn-16 mechanical specifications, 0.4mm dimensions for the 16-lead, 0.4mm pitch nudfn package are presented below. package dimensions package nudfn jedec no. mo-229c * leads 16 millimeters inches dim. min nom max min nom max a 0.45 0.50 0.55 0.018 0.020 0.022 a1 0.00 0.02 0.05 0.000 0.001 0.002 a3 0.127 ref 0.005 ref b 0.15 0.20 0.25 0.006 0.008 0.010 b1 .20 bsc 0.008 bsc d 3.40 3.50 3.60 0.134 0.138 0.142 d2 2.70 2.80 2.90 0.106 0.110 0.114 e 1.10 1.20 1.30 0.043 0.047 0.051 e2 0.20 0.30 0.40 0.008 0.012 0.016 e 0.400 bsc 0.016 bsc l 0.20 0.25 0.30 0.008 0.010 0.012 l2 0.15 ref 0.006 ref # per tape and reel 3000 pieces controlling dimension: millimeters * this package is compliant with jedec standard mo-229c with the exception of the d, d2, e, e2, and l dimensions as called out in the table above. dimensions for 16-lead, 0.4mm pitch nudfn package
cm1620 rev. 2 | page 15 of 15 | www.onsemi.com on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes witho ut further notice to any products herein. scillc makes no warranty, repr esentation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the app lication or use of any product or circuit, and specifically disclaims any and all li ability, including without limitation special, consequential or incidental dama ges. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in differe nt applications and actual performance may vary over time. all operating parameters, in cluding ?typicals? must be validated for each customer appli cation by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intende d, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any othe r application in which the failure of the scillc product could create a situation wh ere personal injury or death m ay occur. should buyer purchas e or use scillc products for an y such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subs idiaries, affiliates, and distributors harm less against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim allege s that scillc was negligent regardi ng the design or manufacture of the pa rt. scillc is an equal opportunity /affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. ? publication ? ordering ? information ? literature ? fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303-675-2175 or 800-344-3860 toll free usa/canada fax : 303-675-2176 or 800-344-3867 toll free usa/canada email : orderlit@onsemi.com ? n. ? american ? technical ? support : 800-282-9855 toll free usa/canada europe, ? middle ? east ? and ? africa ? technical ? support: ? phone: 421 33 790 2910 japan ? customer ? focus ? center ? phone: 81-3-5773-3850 ? on ? semiconductor ? website : www.onsemi.com ? ? order ? literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative ? ?

▲Up To Search▲

Price & Availability of CM1620-06DE

	To Download CM1620-06DE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .